ICM continues to expand its diverse catalog in 2026, with a strong wave of recent releases now arriving in the June distribution cycle. Known for combining historical accuracy, broad subject coverage, and accessible build complexity, ICM remains a key manufacturer for modelers interested in everything from WWII armor and vehicles to figures and diorama accessories.
The June 2026 release cycle showcases a mix of vehicle kits, support equipment, and figure-based sets, with several newly available kit numbers now reaching hobby retailers and distributors.
June 2026 Release Cycle (Current Availability)
ICM’s latest releases emphasize flexibility for builders, offering subjects that can be used individually or combined into larger diorama scenes.
Featured Recent Releases:
Kit No. 35107 – “Stuka zu Fuß” Sd.Kfz. 251/1 Ausf.B Halftrack (1/35 scale)
In 1929, Germany began developing its own rocket weapons, and in 1931, a dedicated department was established within the War Ministry to oversee this work. By 1940, the Wehrmacht had already introduced 158 mm multiple rocket launchers—the 15 cm Nebelwerfer 41—for direct fire support of ground units.
Subsequently, heavier systems were developed, employing 280 mm high-explosive and 320 mm incendiary rockets. These powerful munitions, weighing around 80 kg, had a range of approximately 2 km and were intended to break through enemy defenses in both field and urban conditions.
To improve mobility, launchers were mounted on various platforms. One such system was based on the Sd.Kfz. 251 armored personnel carrier. It was equipped with three wooden or metal launch frames on each side, carrying rocket projectiles. Elevation was adjusted by changing the angle of the frames, while horizontal aiming was achieved by turning the entire vehicle. The rockets were fired electrically via remote ignition.
Among German soldiers, this system earned the nickname Stuka zu Fuß (“Stuka on foot”), referencing the famous Ju 87 dive bomber.
Kit No. 35724 – Tankabwehr, 1918 WWI German Army Anti-tank squad (1/35 scale)
When British Mark I tanks first appeared on the Somme in 1916, German soldiers were often defenseless, attempting to use various improvised means against them. Later, a special armor-piercing 7.92 mm “K” (Kern) bullet with a steel core was developed, and cartridges with these bullets were included in the ammunition load of MG 08 machine guns.
In November 1917, the German command ordered Mauser to develop a specialized weapon – the Mauser Tankgewehr M1918 (T-Gewehr). It was the world’s first anti-tank rifle, created exclusively for destroying armored targets. It was single-shot, operated by a two-man crew, had a caliber of 13.2 mm, and weighed 17.7 kg. This weapon could penetrate a 26 mm steel plate at a distance of 100 meters and 18 mm at 500 meters.
On the front, special units began to be formed to combat tanks, equipped with anti-tank rifles and machine guns. Anti-tank rifles were typically deployed in groups of 4-6 units along the main defensive line or just behind it. Machine guns were often placed in camouflaged positions to provide flanking fire.
For effective use of anti-tank rifles, it was recommended to concentrate fire on the driver’s position and fuel tanks, while machine-gun fire was directed at the viewing slits of armored vehicles.
Kit No. 35723 – ”Zum Angriff vorwärts!” WWI German Army Sturmtruppen with trench Diorama Set (1/35 scale)
During World War I, the German Army first deployed assault units during the Battle of Verdun. Initially, these groups consisted of three-man teams, and their tactics focused on flanking enemy trench positions. The soldiers were equipped with sharpened entrenching tools, daggers, bayonet knives, and grenades carried in large specialized bags.
The experience gained from these early operations led to the formation of dedicated assault companies, which became permanent elements within German divisions. By 1918, many formations of the Imperial German Army had their own assault battalions, typically composed of assault companies, an infantry gun battery, light mortar units, and flamethrower detachments.
Assault troops often operated in conditions where chemical weapons were used. Although the German Army was the first to employ chemical warfare agents, the Allies soon caught up, and German soldiers themselves were forced to experience the effects of gas attacks.
Kit No. DS3532 – Festive dinner on the front line - WWII US Army Field Kitchen Diorama Set (1/35 scale)
A complete package combining vehicle elements, accessories, and figures designed to create a cohesive scene straight from the box.
Hot and hearty meals on the front lines played a much more significant role for soldiers than for ordinary civilians in peacetime. Regular meals during wartime not only addressed the issue of maintaining combat readiness but also had considerable moral importance.
During World War II, the U.S. Army used M-1937 field ovens, which ran on liquid fuel, for cooking. These ovens allowed soldiers to fry, roast, stew, or even bake pies. Similar ovens could also be installed in the beds of army trucks converted into field kitchens; these vehicles were called “Kitchen Trucks.” These trucks had extended frame arches for canvas covers so that cooks could stand upright while working.
Wooden bench-seats for personnel, which were normally installed inside standard army trucks, could be placed on the outside in Kitchen Trucks to hold pots, baking trays, and other kitchen equipment. Cooks working in field kitchens and Kitchen Trucks aimed to provide soldiers with hot meals at least twice a day. Most of the food prepared was simple but high in calories. However, whenever possible, American soldiers were treated to something more enjoyable—for example, roasted turkey.
Kit No. DS3521 – Before the assault Eastern Ukraine 2022 Diorama Set (1/35 scale)
Full-scale combat operations that began in February 2022 posed a severe and serious challenge for the Armed Forces of Ukraine from the outset. During the summer and autumn of 2022, the main focus was on the Eastern operational zone, which became a theater of high-intensity military actions. Alongside maneuver warfare, Ukrainian Defense Forces employed assault tactics aimed at dislodging the enemy from fortified areas and strongpoints. There were also assaults on populated areas, arguably the most challenging aspect of modern warfare. The intensity and complexity of these assaults were evidenced by areas changing hands multiple times. To execute assault missions, besides specially trained fighters, a variety of forces and means were utilized—from armored vehicles to FPV drones. According to soldiers’ feedback, successful assaults relied on meticulous planning, terrain study, direction of movement, evacuation routes, and anticipation of enemy forces and their firepower intensity.
These kits highlight ICM’s ability to provide not just standalone models, but complete scene-building solutions for hobbyists.
Key Features of ICM Kits
ICM continues to stand out for its balanced approach to scale modeling:
- Accurate historical subjects across multiple eras
- Clean, precise molding with manageable part counts
- Strong focus on soft-skin vehicles and support equipment
- Integration of figures, vehicles, and accessories within themed sets
This makes ICM kits suitable for a wide range of builders, from intermediate hobbyists to experienced diorama creators.
Upcoming Releases and Future Projects
ICM’s pipeline for late 2026 continues to expand, with a focus on both military and civilian modeling subjects.
Upcoming Highlights:
Expansion of WWII Truck Series (1/35 scale)
Additional variants to extend convoy and logistics themes, including specialized cargo and field-modified versions.New Diorama Set Range (1/35 scale)
Continued development of DS-series kits that combine vehicles, figures, and accessories into unified build concepts.Modern Emergency and Civilian Vehicles
Fire, rescue, and utility vehicles that broaden ICM’s reach beyond traditional military modeling.Aircraft Line Growth (1/32 and 1/48 scale)
New large-scale aircraft kits with improved interior detail and multiple configuration options.Additional Figure Sets
Expanded figure offerings focused on specific roles such as mechanics, drivers, and logistics crews.
Versatility for Builders and Diorama Artists
ICM remains one of the most versatile brands in the hobby due to its wide-ranging catalog. Modelers benefit from:
- Vehicles that work as standalone builds or part of larger scenes
- Figure sets designed to complement vehicles and tell a story
- Equipment and accessories that add depth and realism
This flexibility supports the growing trend toward diorama-based modeling, where context and storytelling are as important as the individual kit.
Supporting the Diorama Trend
ICM’s DS-series kits, including DS3532 and DS3521, reinforce the company’s focus on complete scene creation. By combining multiple elements into a single package, these kits make it easier for modelers to:
- Build cohesive displays
- Maintain historical accuracy
- Create realistic environments with minimal aftermarket additions
Availability Through AFV Hobby Hub
ICM’s June 2026 releases—including kits 35107, 35724, 35723, DS3532, and DS3521—along with upcoming products, are available through:
- Wholesale distribution to hobby retailers
- Direct retail sales at AFVHobbyHub.com
Customers can expect:
- Fast U.S.-based shipping
- Reliable stock availability
- Access to both current releases and future arrivals
Leave your comment